Billion BiPAC 8200N User Manual Download Page 104

Page: 104 / 133

Internal IP Address:

The IP address values for Local LAN machines you want to control. (For IP

packets from LAN to WAN, it is the source IP address. For IP packages from WAN to LAN, it is the

destination IP address.)

Internal Port:

The Application port values for local LAN machines you want to control. (For TCP/

UDP packets from LAN to WAN, it is the source port value. For TCP/UDP packets from WAN to

LAN, it is the destination port value.)

External IP Address:

The IP address values for Remote WAN machines you want to control. (For

IP packets from LAN to WAN, it is the destination IP address. For IP packages from WAN to LAN,

it is the source IP address.)

External Ports:

The Application port values for remote machines you want to control. (For TCP/

UDP packets from LAN to WAN, it is the destination port value. For TCP/UDP packets from WAN

to LAN, it is the source port value.)

Time Schedule:

Scheduling your prioritization policy.

Remember clicking Add to save your settings.

101

Summary of Contents for BiPAC 8200N






































































































































Search results

Summary of Contents for BiPAC 8200N

Reviews:

Related manuals for BiPAC 8200N

Brands by name

Popular brands

Billion BiPAC 8200N, User Manual

Search results

Summary of Contents for BiPAC 8200N

Reviews:

Related manuals for BiPAC 8200N

Brands by name

Popular brands