Billion BiPAC 8200N User Manual Download Page 117

Page: 117 / 133

114

VLAN

VLAN (Virtual Local Area Network) is a group of devices on different physical LAN segments that

can communicate with each other as if they were all on the same physical LAN segment.

VLAN Group Name:

Please input VLAN name of this rule.

VLAN ID:

Please input VLAN ID that will be used for Tagged member port(s).

Ethernet Port(s):

Please check the interface that you would like to use in this VLAN ID group.

WAN Tag:

Select the WAN Tag from the drop-down menu to associate the VLAN Group with it.

There are 4 options:

• Untag WAN (NAT):

Outgoing frames without VLAN (Network Address Translation/routing).

• Tag WAN (Bridge):

Outgoing frames with VLAN (bridging/forwarding) .

• Untag WAN (Bridge):

Outgoing frames without VLAN (bridging/forwarding).

• Tag WAN (NAT):

Outgoing frames with VLAN (Network Address Translation/routing).

Click Apply to confirm the settings.

Summary of Contents for BiPAC 8200N






































































































































Search results

Summary of Contents for BiPAC 8200N

Reviews:

Related manuals for BiPAC 8200N

Brands by name

Popular brands

Billion BiPAC 8200N, User Manual

Search results

Summary of Contents for BiPAC 8200N

Reviews:

Related manuals for BiPAC 8200N

Brands by name

Popular brands