132
L
Shared
It is similar to network authentication ‘Open’. But here the WEP Encryption must be enabled.
L
802.1x
RADIUS Server IP Address:
RADIUS( Remote Authentication Dial In User Service), Enter
the IP address of RADIUS authentication server.
RADIUS Server Port:
Enter the port number of RADIUS authentication server here.
RADIUS Key:
Enter the password of RADIUS authentication server.
WEP Encryption:
select to enable or disable WEP Encryption. Here select Enable.
Current Network Key:
select the one to be the current network key. Please refer to key 2- 3
below.
Network Key (1- 4):
Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption
keys.Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys.
Summary of Contents for BiPAC 7800NL
