87
Start Time:
enter the start time of each day in hh:mm format. Leaving it empty means 00:00.
End Time:
enter the end time of each day in hh:mm format. Leaving it empty means 23:59.
Click
Apply
to confirm your settings. The following prompt window will appear to remind you of the
attention.
If you needn’t this rule, you can check the box, press Remove, it will be OK.
URL Filter
URL (Uniform Resource Locator – e.g. an address in the form of http://www.abcde.com or
http://www.example.com) filter rules allow you to prevent users on your network from accessing
particular websites by their URL. There are no pre-defined URL filter rules; you can add filter rules to
meet your requirements.
URL Filtering:
select to enable or disable URL Filtering feature.
Summary of Contents for BiPAC 7800NL
