Bilanciai D70, Use And Maintenance Manual

Page: 26 / 88

WARNING
Do not route the terminal connection cables alongside power
cables as these could cause disturbances that interfere with
the correct operation of the terminal. Only use the connection
cable supplied with the terminal. If the cable supplied is too
short, do not attach an extension lead but contact the
Manufacturer.
3.2 Connection of the terminal to the platform scale
The terminal is normally supplied with a pre-wired cable for connection
to the platform scale. The female connector on this cable should be
plugged into the male 9-pin connector (JBIL) on the rear of the terminal
(see point 4 Figure 3.1 on page 1-23).
WARNING
The cable screen should always be connected to the metal
cap of the 9-pin connector. Do not route the scale connection
cable alongside power cables.
D70
1-26