Bilanciai D70, Use And Maintenance Manual

Page: 54 / 88

6.1.1 Recharging the internal batteries
The battery charge is shown by the message
BATT
. If
BATT
flashes
during the battery operating mode (alternating with the measured weight
value), this means that the batteries are low. If the
BATT
indication
remains permanently on, this means that the terminal will switch off
within 10 seconds.
In this condition, interrupt any weighing operations and charge the
batteries, otherwise the terminal will automatically switch off to prevent
the batteries from being damaged.
WARNING
The adapter for battery charging must be connected with the
terminal on and during the charging phase, the terminal must
not be switched off.
Proceed with a First charge if the batteries are exhausted.
If, during the charging phase, key is pressed,
ISTCHG
is not
displayed but
TCHG
which indicates that the charging status is in
progress. If key is pressed again, the terminal displays the
remaining charging time. At the end of the terminal charging procedure,
press to display the message
ISTCHG
.
D70
1-54