Is
s
ue da
te: 1
6
.4.2
015
18
Subject to technical modifications; no responsibility is accepted for the accuracy of this information
© Bihl+Wiedemann GmbH
Internet: www.bihl-wiedemann.de
•
Flosswoerthstr. 41
•
D-68199 Mannheim
phone: +49 621 33 996-0 • fax: +49 621 3 39 22 399
C-Series AS-i Master Module
Operating the AS-i
3.
Verify that your cRIO is connected properly by right clicking the target within
your project and going to "Connect"
4.
Open the front panel of the "BW3023 AS-i Commissioning.vi"
Assigning an AS-i Address in the Configuration Mode
Assigning a Slave Address
1.
Connect a new slave in the AS-i network, the state of this slave is showed in
the “Slave List” indicator.
2.
Select the devices old address within the “Old Address” control.
3.
Select the new address within the “New Address” control.
4.
Click the button “Change Slave Address”.
5.
If the indicator “Result Code” is 0, address assignment was successful.
Summary of Contents for BW 3023
Page 24: ......
