background image

16

OPERATION

SAFETY 

REGULATIONS 

FOR

OPERATION

Operator Authorization:

 The vehicle

may  only  be  used  by  trained  person-
nel,  who  have  been  authorized  to
operate the vehicle by the supervisor
or the designated authority.

Operator’s  Responsibilities:

  The

operator  must  be  informed  of  his
duties  and  responsibilities  and  be
trained in the operation of the vehicle
and  shall  be  familiar  with  the  opera-
tor’s manual.

Unauthorized  Use  of  Vehicle:

  The

operator is responsible for the vehicle
during  the  time  it  is  in  use.  He/she
shall  prevent  unauthorized  persons
from driving or operating the vehicle. It
is forbidden to carry passengers or to
lift personnel.

Damage  and  Faults:

  The  supervisor

or  the  designated  authority  must  be
immediately  informed  of  any  damage
or  fault  codes.  Vehicles  not  safe  for
operation must not be used until they
have been repaired.

Repairs:

 The operator must not carry

out  any  repairs  or  alterations  to  the
vehicle. The operator must never dis-
able  or  adjust  safety  mechanisms  or
switches.

Hazardous area:

 A hazardous area is

defined as the area in which a person
is at risk due to vehicle movement, lift-
ing operations, or the load itself. This
also  includes  areas  which  can  be
reached  by  falling  loads  or  lowering
equipment.

• Unauthorized persons must be kept

away from hazardous area.

• Where there is danger to personnel,

a  warning  (the  horn)  must  be
sounded with sufficient notice.

• If  unauthorized  personnel  are  still

within the hazardous area the vehi-
cle shall be brought to a halt imme-
diately.

Safety  devices  and  warning  signs:

Safety  devices,  warning  signs  and
warning  instruction  shall  be  strictly
observed.

DRIVING PROCEDURES

The  vehicle  can  be  driven  with  the
platform  raised  or  lowered;  however,
the speed is restricted when the plat-
form is raised above a preset limit.

Do not leave the platform cage
floor  area  while  the  operator
platform  is  elevated.  Do  not
lean  out  from  the  outside  of  a
cage rail. Climbing on the guard
rails and/or trays is strictly pro-
hibited  and  can  lead  to  severe
injury or death. 

Only one person is permitted in
the  operator’s  compartment  at
all time.

WARNING:

WARNING:

Summary of Contents for Joey J1 Series

























Reviews: