STOP
RUN
FWD
REV
REM
LOC
U
F
H
STOP
RUN
FWD
REV
REM
LOC
U
F
H
STOP
RUN
FWD
REV
REM
LOC
U
F
H
STOP
RUN
FWD
REV
REM
LOC
U
F
H
STOP
RUN
FWD
REV
REM
LOC
U
F
H
D
MODE
MODE
MODE
MODE
MODE
STOP
RUN
FWD
REV
REM
LOC
U
F
H
STOP
R
U
N
FWD
REV REM
LOC
U
F
H
LOCAL
REM
LOCAL
REM
LOCAL
REM
WWW.BIGASSSOLUTIONS.COM © 2016 DELTA T CORP. ALL RIGHTS RESERVED.
62
To select the fan’s command source,
press the LOCAL/REM button. The auxiliary controller is
preprogrammed to accept digital and analog inputs from customer automation systems for start/stop
and speed commands, or to be directly controlled from the auxiliary controller. Upon startup, the fan
puts priority on external commands provided by automation systems or other fans.
Note: To access all buttons on
the auxiliary controller, the controller's button cover must be removed (if used).
To operate the fan from the auxiliary controller,
press the LOCAL/REM button to make sure that the LOC indicator
is illuminated. The RUN, STOP, and FWD/REV buttons are functional only when the LOC indicator is illuminated.
Note: To access the LOCAL/REM button on the controller, the controller's button cover must be removed (if used).
Toggling the fan’s command source
Cycling through the LED display modes
To cycle through the possible display options on the auxiliary controller,
press the MODE button
repeatedly. Below are the possible screens in the order in which they appear on the display.
Note: To
access the MODE button, the controller's button cover must be removed (if used).
MODE
FAN SPEED %
(start-up screen)
FAN MOTOR
CURRENT
KEYPAD
LOCK
FAN ACTUAL
FREQ.
FAN FREQ.
COMMAND
"REM" is illuminated
EXTERNAL AUTOMATION
CONTROL ENABLED
"LOC" is illuminated
AUXILIARY CONTROL
COMMANDS ENABLED
