READY
RUN
FAULT
1 2 3
1 2 3
ON
ON
RA RB RC
AVI
NPN
PNP
PNP
ACI
ACI
RED
BLACK
BROWN
BLUE
GREEN/YELLOW
GREEN
RED
BLACK
GREEN/YELLOW
BLUE
RED
BLACK
GREEN/YELLOW
AC
Input
Wiring
Motor
Output
Wiring
Spare Entry
(½'' NPT unplugged)
Data
Cable
AC Input Fusing
NEMA L6-20P (1.0 hp) or
NEMA L6-30P (1.5–2.0 hp)
Twistlock Plug and
15 ft (4.6 m) Cord
WWW.BIGASSSOLUTIONS.COM © 2016 DELTA T CORP. ALL RIGHTS RESERVED.
41
Wiring: 200–240 V, 1 Φ with EMI Filter
WARNING: Wait three minutes after disconnecting before servicing!
WARNING: Improper installation can cause electric shock or damage to the motor and VFD! A qualified
electrician should perform the installation.
The diagram below shows a typical EMI filter installation on a standard VFD (200–240 V, 1 Φ) using single-phase
input from AC power supply.
Actual component layout may differ from illustration.
Note: Fire relay not shown below. See “Wiring: Fire Relay” for fire relay wiring diagrams.