BIG ASS FANS HAIKU MK-HK4-041806, Installation Manual

Page: 39 / 124

37
MAINTENANCE
WARNING
Risk of fire, electric shock, or injury to persons during cleaning and user
maintenance. Disconnect the appliance from the power supply before
servicing.
Please take a few moments each year to perform the following preventative
maintenance procedures on your fan to ensure its safe and efficient operation.
Check the safety cable, hardware, and wiring
☑ Check that the safety cable is properly installed by removing the canopy or wiring
cover screws, sliding the canopy or wiring cover down the downrod or downtube,
and examining the safety cable and hardware.
☑
Make sure the mounting hardware and the screws securing the airfoils to the motor
unit are securely fastened.
☑ Make sure the wire connectors are secure and the ground wire is securely
connected.
Clean the airfoils
Dust the airfoils regularly. If the fan becomes dirty, clean it with a soft cloth. Do not use
solvents, gasoline, or any other chemical cleaners. These may cause surface distortion
and damage to the fan.
Clean the lights
Downlight: Clean the light’s lens periodically to ensure optimal performance. Wipe
the lens with a soft cloth. If necessary, use water and a mild soap or a gentle liquid
cleaner. Do not clean the light or lens with scouring pads, alkaline cleaning substances,
gasoline, thinner, benzene, heating oil, or polishing powder.
Uplight: Clean the LEDs periodically to ensure optimal performance. Use a
compressed air duster to remove dust and debris from the LEDs. Do not touch the
LEDs while cleaning. Hold the duster can upright when using.
For more operation, maintenance, and troubleshooting information, visit
www.bigassfans.com/support