BIG ASS FANS HAIKU MK-HK4-041806, Installation Manual

Page: 11 / 124

9
UNIVERSAL MOUNT INSTALLATION
2. Install downrod
No Uplight
If not installing an uplight, align holes on downrod with holes on motor bracket. Position
downrod wiring harness so that it is on the same side of the motor shaft as the motor
unit wiring harness. Position ground wire and safety cable so that they are on the
opposite side of the motor shaft as the motor unit wiring harness. Secure downrod with
the lower mounting hardware (Fig. 2a) .
Uplight
Align holes on downrod with holes on motor bracket. Position downrod wiring harness,
ground wire, and safety cable so that they are on the
opposite side
of the motor shaft
as the motor unit wiring harness. Secure downrod with the lower mounting hardware
(Fig. 2b) .
M6 x 32 mm Bolt
M6 Nut
Motor Unit Wiring
Harness
Downrod Wiring
Harness
M6 x 32 mm Bolt
M6 Nut
Motor Unit Wiring
Harness
Downrod Wiring
Harness
Fig. 2a
Fig. 2b
Ground Wire and
Safety Cable
Ground Wire and
Safety Cable