BIG ASS FANS HAIKU MK-HK4-041806, Installation Manual

Page: 18 / 124

16
UNIVERSAL MOUNT INSTALLATION
11. Wire fan
WARNING
Disconnect power to fan location before wiring fan.
Do not connect fan to a damaged power source. Do not attempt to resolve
electrical failures on your own. Consult a qualifi ed electrician if uncertain of the
electrical installation of this fan.
Wire fan as shown on the following pages using the wire connectors. If your fan
packaging did not include an EMI fi lter, refer to Fig. 11a. If your fan packaging included
an EMI fi lter, refer to Fig. 11b.
The EMI fi lter is included only for certain regions and fan
diameters.
Attach green and yellow ground wire to mounting bracket with the unpainted screw.
Connect wiring harness from power supply to wiring harness from downrod, making
sure that the wiring and safety cable are routed in the same direction.
Carefully tuck wiring into outlet box or building structure. Ensure wire connectors are
turned upward and that wires are spread apart with grounded conductors on one side
of the outlet box/mounting structure and ungrounded conductors on the other side.
Supply Power Wire Colors
North America
100–120 V
Australia All other regions
AC Hot/L1
Brown
Black Brown or Red Brown
AC Neutral/L2
Blue
White Black or Light Blue Blue
PE/Earth Ground
Green with Yellow
Green or Bare
Copper
Green with Yellow Green with Yellow
Wire Connector Operation
1 2