BIG ASS FANS Haiku 60, Installation Manual

Page: 8 / 23

©2013 DELTA T CORP. ALL RIGHTS RESERVED. 4
PREPARATION (CONT.)
Tools needed
You will need the following tools to install the fan. If you are installing an outlet box, additional tools
may be necessary. Consult the outlet box manufacturer’s instructions.
• Ladder
• Hex key (provided) • Wire stripper
• Adjustable wrench • #1 Phillips screwdriver
Preparing the mounting location
For mounting methods not covered in this manual, contact Haiku Customer Service.
If you are mounting your fan to a ceiling-mounted outlet box, the outlet box must be suitable for fan
support. If there is not an outlet box at the location where you are installing your fan, one must be
installed on a ceiling joist or beam and properly wired. At least 8” (20 cm) of wiring should be hanging
from the outlet box. The illustration below shows a typical outlet box used for fan installations.