HAIKU
®
by Big Ass Fans
17
Annual maintenance
Please take a few moments each year to perform the following preventative maintenance procedures
on your fan to ensure its safe and efficient operation. If you have any questions, require assistance
with your fan, or need replacement parts, contact Haiku Customer Service at
www.haikufan.com/service.
Note: Actual fan setup may differ from the illustration below.
• Check that the safety cable is properly installed by sliding the wiring cover and trim down the
extension tube, and then examining the safety cable and hardware.
• Make sure the mounting hardware is securely fastened.
• Make sure the hardware securing the airfoils to the fan hub is securely fastened.
• Dust the airfoils regularly. If the fan becomes dirty, clean it with a damp cloth and ordinary soap and
water. Do not use solvents, gasoline, or any other chemical cleaners! These may cause surface
distortion and damage to the fan.
• Make sure the wire nuts are secure and the ground wire is securely connected, or make sure the
wires are secured in the terminal strip and the Earth wire is securely connected.
• If the fan is mounted to a concrete ceiling and the hanger plate accessory was installed, make sure
the anchor bolts, anchor hook, and safety cable are secured.
M a i n t e n a n c e
Safety
cable
Wiring
cover
Wiring
cover trim
Airfoil
Outlet
box
WARNING: Disconnect the fan from power before servicing!
Outlet Box Mount
Concrete Ceiling Mount
Safety
cable
Wiring
cover
Airfoil
Wiring
cover trim
Summary of Contents for Haiku 60
Page 1: ...Installation Guide A2...
Page 22: ......
Page 23: ...www haikufan com 2013 Delta T Corporation 002491...