BIG ASS FANS Haiku 60, Installation Manual

Page: 15 / 23

HAIKU ® by Big Ass Fans 11
ELECTRICAL (CONT.)
Wiring diagram (without EMI filter)
Wire color chart
50/60 Hz Compatible
Fan Power Supply
Wire Color
AC Line (L1)
Brown
AC Line/Neutral (L2/N)
Blue
Earth/PE
(connected to fan chassis)
Green with Yellow Tracer
North America
100–120V System
Black White Green or Bare Copper
North America
208–240V System
Black, Red, or Blue Red, Blue, or Black Green or Bare Copper
European Union (EU),
United Kingdom
220–240V System
Brown, Black, or Grey Blue Green with Yellow Tracer
Australia*
240V System
Brown or Red Black or Light Blue Green with Yellow Tracer
* Special Note: If installing the fan in Australia, a licensed electrician must perform the electrical installation.
WARNING: Do not connect the fan to a damaged power source! Do not attempt to resolve electrical failures
on your own. Consult a qualified electrician if uncertain of the electrical installation of this fan.
Ensure power is disconnected before installing the fan! If the EMI filter is included with your fan, follow
the wiring diagram on the following page.
Do not use the fan with a dimmer switch.
AC Hot / L1
AC Neutral / L2
PE / Earth Ground
Brown Blue G
reen/Yel
+1
2VDC, 30
W
Powe
r S
upply
Switched 100–240VAC 1Ф,
50–60Hz, 0.36A