©2013 DELTA T CORP. ALL RIGHTS RESERVED.
8
F A N M O U N T I N G ( C O N C R E T E C E I L I N G )
Step 6. Securing the safety cable
Loop the safety cable around the ceiling hook, and then secure
it with the safety cable shackle.
Proceed to
Step 7. Wiring the fan
on page 10.
Step 5. Hanging the fan
Raise the fan to ceiling hook, and then attach it by securing
the extension tube bracket to the ceiling hook with the
mounting hardware as shown on the right.
Be careful not to drop any hardware in the wiring
cover during installation!
Safety cable
& shackle
Step 4. Preparing the ceiling hook
Seat the rubber bushing inside the eye of the ceiling fan
hook as shown. If there is not a ceiling hook at the fan site,
the hanger plate accessory should be installed. See the
following page for details on installing the hanger plate
accessory.
Make sure the hook is cast into the concrete
ceiling before seating the rubber bushing.
The concrete mounting method is not available in North America.
Summary of Contents for Haiku 60
Page 1: ...Installation Guide A2...
Page 22: ......
Page 23: ...www haikufan com 2013 Delta T Corporation 002491...