WWW.BIGASSFANS.COM
4
LIGHT MODULE ROTATION (OPTIONAL)
90° or 180° Rotation (Figure C)
C1.
While supporting the light module, use a 9/64 in. allen wrench to turn the
screws on both ends of the fixture counterclockwise until they completely back
out of the yellow end caps of the light module.
C2.
Rotate the light module 90° or 180°.
C3.
Turn the screws on the ends of the fixture clockwise to secure them.
45° or 135° Rotation (Figure D)
Remove the fixture end caps by removing the two screws from each end of the
fixture and sliding the end caps down and outward.
D1.
While supporting the light module, remove the inner screws using a 9/64 in.
allen wrench.
D2.
Rotate the light module 45° or 135°.
D3.
Reinstall the screws in the second holes. Reattach the fixture end caps.
