manualshive.com logo in svg

BIFFI IMVS2000v2, Installation, Operation And Maintenance Manual, Page: 67 / 110

Share
Download
BIFFI IMVS2000v2 Installation, Operation And Maintenance Manual Download Page 67

Installation, Operation and Maintenance Manual

September 2019

MAN720_IMVS2000v2_IOM Rev. 6

Section 7: Local Operator Interface

Local Operator Interace

7.3 

View/Setup Mode Menu

The View\Setup Mode Menu allows configuring the available parameters  
(see Section 6 for details).

Logged in as “Observer,” the parameters are readable only. 

The current position into the Setup and View Mode menus is yellow-highlighted. 

7.3.1 

View Graph of the Setup/View Mode Menus

The View Graph of the Setup and View Mode Menus shows the position of each available 
parameter of these menus.

To help reading the View Graph, a different color is associated to the different menu entries.

Table 8. 

Menu and Sub-Menu
Exit of Menu and Sub-Menu
Available Parameter
Available Command/Calibration
Available Command/Parameter for VAC only (for Biffi use only)
Unavailable Command/Parameter (for Biffi use only)

View Mode Menu
Setup Mode Menu Exit View-Setup

Name Plate 

Exit Name Plate
Device Data

Exit Device Data

Dev. Mfr
Dev. Name

Dev. Tag

Dev. S.N.
Dev. Date

SW L. Card

SW D. Card

Actuator Data

Exit Actuator Data

Act. Mfr
Act. Model
Act. Tag
Act. S.N.

Act. Pr. Size

Act. Date

Valve Data

Exit Valve Data

Valve Mfr
Valve  Model
Valve Tag
Valve S.N.
Valve Date

63

Summary of Contents for IMVS2000v2















































































































Reviews:

No comments