PERIODIC MAINTENANCE
10
Your Bienfang
®
Vacuum press has been engineered to
require a minimum level of maintenance. Review the
following to keep the press in prime operating condition
throughout its lifetime.
1. Clean the platen regularly; Bienfang UnStik™ adhesive
releasing solvent or Bienfang Platen Cleaner can be used
to dissolve difficult deposits.
2. Check the vent cloth regularly for proper positioning and
cleanliness. Ensure both vacuum manifolds are fully cov-
ered and clean or replace the vent cloth as necessary when
soiled.
3. Check the vacuum manifolds occasionally for blockages.
Make sure that obstructions, paper and debris are
removed.
4. Check the rubber diaphragm occasionally for abrasions,
cuts, slices and cleanliness; repair or clean as necessary.
5. Check the foam support occasionally for tears, depres-
sions, hard or soft spots, and cleanliness. Repair or clean
as necessary.
6. Check the overall press occasionally for levelness, loose
screws or damaged components. Adjust, tighten or fix as
necessary.
7. Check the vacuum pump occasionally for cleanliness,
dryness and any strange or unusual noises. The vacuum
pump requires no maintenance, however, keeping the
pump clean and dry will result in a longer life.
Hunt Corporation warrants to the original consumer purchaser that each new Bienfang
®
equipment product which proves
defective in materials or workmanship within the applicable warranty period will be repaired or, at our option, replaced
without charge upon its return, postpaid, as outlined below. The applicable warranty shall be one year from date of
purchase. “Original consumer purchaser” means the person who first purchased the product covered by this warranty
other than for purposes of resale.
Hunt’s liability for breach of any warranty express or implied shall be limited to the repair or replacement, at Hunt’s option,
of the defective item. Hunt shall not be liable for damages, including but not limited to incidental or consequential dam-
ages, arising out of or in connection with the use or performance of any Bienfang product.
To get performance under this warranty, contact Bienfang Technical Support (1-888-240-6021) for assistance or to obtain
a Return Authorization. If it is to be returned, pack the product securely to prevent damage in transit and send the
product, postpaid or freight prepaid, with a description of the defect or malfunction and proof of the date of purchase to
Hunt, Attn: RA Number. Hunt is not responsible for damages from mishandling and abuse in transit, in which case a claim
should be filed with the carrier.
This warranty extends to and is enforceable only by the original consumer purchaser, and only for the period (during
applicable term) during which the product remains in the possession of the original consumer purchaser.
Warranty Department • Hunt Corporation • 2301 Speedball Road • Statesville, NC 28677 • Phone: 1-888-240-6021
LIMITED WARRANTY
