background image

ESH 04 

 

14 

 

8  

WARRANTY CONDITIONS 

The manufacturer guarantees that all material and manufacturing defects 
that arise within 24 months from date of purchase will be repaired free of 
charge.

 

Claims are only accepted under the following terms: 

 

The manufacturer and/or supplier is informed immediately of the fault 
for which the warranty claim is being made. 

 

The instructions of the manufacturer and/or supplier regarding storage 
or return of the device are complied with. 

 

Presentation of a legible copy of the invoice for the device concerned, 
showing the date of purchase. 

 

An exact description of the defects or malfunctions identified by the 
customer. 

The manufacturer's warranty will be void if it is found that the 
maintenance, disinfection and inspection instructions have not been 
followed according to the operating instructions; the device has been 
damaged by force or operating error; or has been used in any way 
contrary to the operating instructions and safety instructions. The 
warranty will also be void if original Biegler materials were not used as 
replacement parts, or measures for repair were undertaken by persons 
not authorized by the manufacturer or supplier. 

If the manufacturer is required to meet a warranty claim in accordance 
with these terms, the customer shall bear the costs and risks of transport 
of the device from and to the place of use. 

The manufacturer and/or supplier shall under no circumstances assume 
liability for slight negligence. The compensation for lost earnings and 
profits is likewise excluded. 

 

9  

RETURN OF DEVICES 

Devices must be carefully cleaned and disinfected before being placed in 
the original packaging for returning.  

If the original packaging is no longer available, the product has to be 
suitably packaged for the method of dispatch. 

Summary of Contents for ESH 04




















Reviews: