ESH 04
12
The alarm system does not need to be verified. The alarm limits cannot
be adjusted. Risk management has shown that it is not advisable to
deactivate the alarm signals, because detection of the error (e.g. high
temperature) is required. The operator position is in front of the device.
4
MAINTENANCE
The ESH 04 has been designed to be maintenance free. For long-term
maintenance of quality and functional safety, observe following points:
Always keep the device clean (see the "Cleaning and disinfection"
section).
Periodic technical safety inspections must be carried out as described
in the "Periodic inspections" section.
5
CLEANING AND DISINFECTION
The device may only be cleaned using a soft cloth with water-soluble,
non-abrasive cleaning agents or special cleaning agents for plastics.
Only ready-to-use alcohol-based spray disinfectants (e.g. Meliseptol
Foam pure Fa. BRAUN) may be used for disinfection, whereby the
instructions of the manufacturer must be followed.
Fluff or dust can have an influence on heat transfer and must be kept
away from the device.Important:
Before cleaning or disinfecting, the device must always be
disconnected from the mains power supply or external power
supply.
