UPSI-IP-3 Series
Revision 1-0
10
B2 Intended use – devices
This device is primarily designed for use under difficult and extreme environmental conditions and can be
used both indoors and outdoors. It has been developed for professional use in areas such as industrial control,
communication and measurement technology. This product must not be used in devices or systems in which
a malfunction leads to serious injuries or endangers human life.
Unlike the standard models of the UPSI series (Open Frame or DIN-rail mounting), this device has IP65 protec-
tion. This means that the components mounted in the housing (UPS PCB and energy storage) are completely
protected against contact and dust (IP6x) as well as against water jets from any direction (IPx5) according to
EN 60529.
B3 Intended use – connecting cables
The fixed connection cables may only be used with the device in accordance with the manufacturer‘s speci-
fications.
The input cable (type „Typ „ÖLFLEX® CLASSIC 100 BK 0,6 / 1 kV“ from the LAPP brand) as well as the output
cable (type „ÖLFLEX® CLASSIC 110LT“ from the LAPP brand) are coldflexible control an connection cables for
occasional flexible use and fixed installation under medium mechanical stress. They are also suitable for use in
dry, damp or wet areas.
If using outdoors, observe the indicated temperature range. They are for occasional, non-automated move-
ments, also when temperatures are low. They meet the requirements for slow rotary movements. The maxi-
mum tensile load is 15 N/mm² of conductor cross-section during installation and operation. Compulsory
guidance is not permitted.
