UPSI-IP-3 Series
Revision 1-0
30
F14 Recommendations for a long UPS service life
LiFePO4 batteries age over time depending on cycles, operating temperature and the level of the end-of-
charge voltage. The end-of-charge voltages are optimized so that they are at an optimium between service
life and performance.
To extend the lifetime of the system, the device should not be placed near sources of heat and should be
placed within good air-circulation. The less deep the packs are discharged, the longer the service life lasts.
F15 Maintenance
The UPS contains no serviceable parts. In case of a malfunction the upstream power source has to be discon-
nected and cables have to be removed. Use a dry cloth for cleaning! Maintenance and replacement of batteries
has to be done by the manufacturer.
F16 Disposal
Electric and electronic devices must not be disposed with domestic waste!
Please consider to each country’s own regulation about recycling and disposal
of used batteries at the end of their lifetime or resending to any recycling orga-
nization.
F17 Disclaimer
We, the Bicker Elektronik GmbH, have checked the contents of this document for compliance with the hard-
ware and software described. Nevertheless, deviations can not be ruled out, so we assume no liability for the
complete agreement. The information in this publication is checked regularly, necessary corrections are inclu-
ded in the updated versions.
Suggestions for improvement as well as tips and criticism are always welcome.
F18 Scope of delivery
SCOPE OF DELIVERY
QUANTITY
DESCRIPTION
1x device
UPSI-2406IP-38AC, incl. already permanently installed input and output cable
1x
V
IN
cable, 3x 1.5 mm² (inclusive PE), length 3 m, open end
1x
V
OUT
cable, 2x 1.5 mm², length 3 m, open end
