EN
12
Operating Programme Buttons
On/Off Button
This button starts all programs, which have first been chosen with the Jog-Dial. During the start of the program this button is
lit green. By pressing the On/Off button again the program is ended prematurely.
Pulse Button / Pulse Mode
With this button your
originale
starts with the lowest speed and goes up to level 10 within 2 seconds. During operation in
Pulse mode you must keep this button pressed. Your
originale
stops automatically when the button is released. In Pulse mode
„
88:88
“ and „
H
“ are shown on the display.
Start of an Automatic Program
To start a program your
originale
must be in standby mode. Now choose a program with the jog-dial, your choice of program is
shown by a flashing symbol. By pressing the On/Off switch the program is started, you can follow the progress of the program
on the display (Fig. [13], page 2). After the end of the program your
originale
stops automatically.
SPEED + / - und TIME + / -
Use these buttons to change the speed and time settings.
With the
(SPEED +)
button increase the speed or time. With the
(SPEED -)
button decrease it.
Speed Adjustment
The speed can be set from level 1 to level 10 (H). The display shows the levels as follows: „1, 2, 3, 4, 5, 6, 7, 8, 9, H“.
Set the speed by pressing the button (
SPEED +
) and (
SPEED –
). In manual mode the speed can also be set during operation.
Remove the mixing container only when the blades do not rotate anymore!
