background image

BH Fitness • 20155 Ellipse • Foothill Ranch • CA • 92610

www.

%+)LWQHVV86$

.com • Phone 949-206-0330 • Fax 949-206-0013

4

SECTION 1

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using the treadmill.

User Safety:

Before using this or any other exercise equipment

consult your family physician or health care

professional

in order to develop a well-planned exercise program to fit your health needs. If you

encounter any pain or breathing discomfort while working out,

STOP!

, and consult a physician

before continuing.

1. Close supervision is necessary when this unit is used by or near children, invalids or disabled

persons. Children are curious and vulnerable to accidents. Do not use the unit as a toy.

2. Do not wear loose or dangling clothing while using the treadmill.
3. Maximum user weight is 400 lbs (182kg) for the TS4 treadmill.
4. Only one person can use the unit at a time.
5. Keep hands away from moving parts.
6. The owner is responsible for explaining safety instructions to each user.

Treadmill Safety:

WARNING: To reduce the risk of fire, el ectric shock, injuries to persons or
inflicting the harm of a burn:

7. Turn all the controls to the off position prior to removing the electrical plug from the outlet. The

ON/OFF switch is located on the right, front of the unit.

8. Never leave the unit unattended when plugged in. Always unplug the unit from the outlet

before leaving the room, when unused and before servicing or adding / removing parts.

9. Unplug the treadmill prior to cleaning to reduce the risk of electric shock, serious burns, and the

risk of injuries.

10. Never operate this unit if it has a damaged electrical cord or plug. Do not operate this unit if it is

not working properly. Do not operate this unit if it has been dropped or damaged. Do not operate
this unit if it has been immersed in water. Return the unit to a service center for examination
and repair.

11. Do not pull or carry the unit by the electrical cord. Do not use the cord as a handle.
12. Keep the electrical cord away from heated surfaces.
13. Connect this Treadmill to a properly grounded 110-120V, 15 or 20 Amp dedicated outlet only.
14. Call your service center or BH Fitness with your concerns before taking your treadmill in for

repair.

15. Do not place sharp objects near the unit. Never drop or insert any object into any opening.
16. Do not use outdoors.
17. Do not operate where aerosol (spray) products are being used or where oxygen is being

administered.

18. Use the unit only as described in this manual. Only use attachments recommended by the

manufacturer.

19. For safety, keep a minimum clearance of 18” on the front and each side and 24” at the rear of

the treadmill. Place the unit on a flat stable surface.

Note

–This treadmill has the foldable mechanism, please make sure the incline is adjusted to the

original position before folding the treadmill (to avoid interference between mechanisms).

T S 4

Summary of Contents for TS4 -



























Reviews: