BH FITNESS CS6i, Owner'S Manual

Page: 15 / 26

15
STEP 4
ASSEMBLY OF THE HANDLEBAR
First, remove the two Nuts (L2) from the
Handlebar housing. Put the handlebar (E) into
the Handlebar housing and the wire harness
(L1 & E3) through the opening as shown in
(view A).
STEP 5
ASSEMBLY OF THE COMPUTER
Remove the four Screws (K1) from the back
side of Computer (K). Connect the Wire
Harness (E3 & L1) to the wires coming out of
the computer and fasten the computer on the
Computer Bracket with Screws (K1). Tighten
the Screws securely (do not overtighten).
Computer
Bracket