BH FITNESS CS6i, Owner'S Manual

Page: 14 / 26

14
STEP 3
UPRIGHT INSTALLATION
1) Remove the four Screws (A5), Spring
Washers (A34) and Flat Washers (A4)
from the Main Frame (A) before assembly.
2) Slide the Upright Tube (L) through the
plastic cover (M) first.
3) Insert the Sensor Wire (A7) into the
Computer Cable (L1).
4) Assemble the Upright Tube (L) to the
Main Frame (A) with Screws (A5), Spring
Washers (A34) and Flat Washers (A4).
Tighten the screws securely.
ATTENTION: Take care when pushing
the tubes together so that the cables and
wires are not pinched.