BH FITNESS CS6i, Owner'S Manual

Page: 16 / 26

16
STEP 6
SEAT POST AND SEAT INSTALLATION
1) Loosen Knob (A21) and pull it outward.
While still pulling on the Knob (A21), insert
the Seat Post (D) into the Main Frame (A).
Release Knob (A21) after the Seat Post Tube is
inserted to a position between minimum and
maximum.
Attention: Make sure the Knob has been
latched and seated into the adjusting hole of
the Seat Post (D), so that the seat cannot be
pushed down.
2) Place the Seat (G) with the gap block (D3)
and Handle (D4) and tighten.
ASSEMBLY FOR WATER
BOTTLE HOLDER
Remove the two screws (H3) from the Water
Bottle Holder (H1) on the Upright Tube (L)
and secure it with Screws (H3).
ADJUST THE SEAT
Loosen the Seat Adjustment Handle (D4)
and move the Seat until it is at a comfortable
distance. Tighten the seat adjustment knob to
secure the seat in place.