BH FITNESS BS1299, User Manual

Page: 8 / 16

Instruction :
MOVING
There are moving wheel (13) located in
front foot tube for easy to moving the
machine.
Handlebar and seat adjustment. It is important that the
handlebar and seat are set at the correct height for your
body. Ask your instructor for assistance. Adjusting the
handlebar height-Undo the release lever that is located
where the handlebar post fits into the frame. Slide the
handlebar post up or down to the required height and
retighten the release lever. Make sure it is securely
tightened and that there is no lateral or vertical movement
of the handlebar. The handlebar position can also be
adjusted forwards or backwards. Undo the release lever
located below the handlebar slider. Slide the handlebar
assembly forwards and backwards until you reach the
required position. Then securely re-tighten the release
lever.
Pay attention on ” MIN INSERT” mark for safety adjustment.
Adjusting the seat height.
Undo the release lever located
where the seat post fits into the frame. Adjust the seat to
the required height. Then retighten the release lever.
Make sure it is tighten enough to prevent the seat from
twisting side to side. The seat position can be adjusted
forwards and backwards. Undo the release lever located
directly side of the seat slider. Loosen the knob then slide
the seat to the required position. Then make sure the
release lever retighten.
Pay attention on ” MIN INSERT” mark for safety adjustment.
Seat.
Make sure tighten enough for both side of nut
after adjust the seat position. To prevent the seat from
twisting side to side.