BH FITNESS BS1299, User Manual

Page: 5 / 16

STEP 2
Attach the handlebar post (21) inserting into the
head tube on the frame. Using release lever (2)
to adjusts and tightens the height in proper
position. Then attached handlebar slider (20)
on the handlebar post (21), use release lever (17)
to adjust and tighten the handlebar in proper
position.
Secure fixed the monitor (62) to the console’s
bracket with the screw from the back of the
console. Connect curve cable (64) into monitor
rear part.
STEP 3
Insert the seat post (39) into the frame’s seat
tube. Attach the saddle (1) into seat slider
(38). Then tighten seat clamp’s screw. Insert
the seat slider (38) into the seat post (39) and
fix. Using release lever (2) adjusts and tightens
the height in proper position.
STEP 4
Attach the pedals (9) into the crank arms (4),
each pedal is marked with the L (left) or R (right)
to denote the side of the spinning bike they are
on. Note ‐ the right hand crank is on the same
side as the outer chain guard (3). Be careful to
align the threads correctly to avoid any damage.
A little grease on the threads should help the
pedals to screw in easily and correctly, tighten
using a 15mm spanner; both pedals threads
should tighten towards the front of the spinning
bike.
Attach the bottle cage (15) to the front fork
using screw (16), then put the bottle (101) on
the bottle cage.