BH FITNESS BS1299, User Manual

Page: 13 / 16

4) Make sure flywheel keeps parallel with frame. And two sides distance between flywheel and magnet must
be the same.
5) After finished the above steps, screw the nut by both sides. Make sure the nut is tighten and fixedly.
※
How to replace magnetic holder :
1) To Screw the brake pad set on the magnetic holder and tightened.
2) To Screw the magnetic system (G01) on the frame but don’t tightened.
3) Pull up the resistance knob (22) totally. To make sure brake pad touch flywheel completely. Then re-tighten
the screw and nut of brake pad. Make sure two sides of magnetic system are symmetrical and in the center
of flywheel. Prevent the magnet touch or hit flywheel. Then tighten the screw and washer (41).