BH FITNESS BS1299, User Manual

Page: 12 / 16

0 DLQWHQDQFH&KDUW
No DESCRIPTION Daily Weekly Monthly Quarterly
Annuall
y
1
Keep machine clean: Wipe
machine down with clean & dry
fabric to clear dirt & sweat.
X
2 Wipe Anti-rusty cream or similar on
the seat post set, handlebar set
X
3 Visual check X
4
Check security of handle bar post
& seat post
X
5 Check security of saddle X
6
Remove handlebar post and clean
tube
X
7 Remove seat and clean tube X
8 Check brake pads for wear-align X
9 Check brake adjustment X
10 Check security of all release levers X
11 Check toe straps for signs of wear X
12 Check crank bolts and re-tighten X
13 Make sure pedals are screwed in X
14
Check the magnetic holder in
correct position
X
15 Check cushion X
16 Check belt tension X
17
Wipe the anti-rust oil on the middle
range of flywheel surface (if no
sticker)
X
18 Check bottom bracket X
19 Check flywheel bearings X
20 Full service-frame inspection X
※
Cushion and belt was consumables, will loosen or wear according the frequency of use. Warranty time : 6 months.
※
Adjusting the belt tension – the belt belongs to the flexible material. It will relax with frequency of utilization
and time. It’s normal situation.
1) Loosen the bolt (50), and take off the front axle cover (R) (49) and front axle cover (L) (59).
2) Loosen the nut (52).
3) Rotating the nut of adjuster bolt (102) by clockwise and anti-clockwise to adjusting the belt tension.
Suggest rotating 1/4 of the circles each time. Don’t rotations too much to causing tension too tight then
damage the axle and bearing.