- 33 -
Control unit
EN
- Connect the
N.O.
contact of the coil receiver
S1
to the
OPEN
input.
- Connect the
N.O.
contact of the
S2
loop receiver to input
CLOSE.
- The dimensional values of the loops are only approximate.
We suggest installing the “
MAK-2
” metal mass detector.
*
ENGLISH
DIMENSIONS
This solution is recommended when you want to allow entry to a reserved area, entering or leaving without using the recognition commands,
allowing transit of vehicles in
just one direction.
The vehicle approaches the reser-
ved area.
Occupying the coil
S1
activates bol-
lard’s descent.
When the vehicle is no longer on
loop
S2
the will move back up.
Loops S1 and S2 also have a safety function in that they will not let the device move all the time the vehicle is on top.
12.2
INSTALLATION B
AUTOMATIC ENTRY OR EXIT
ONE DIRECTION
ONE DIRECTION
ONE DIRECTION
PARAMETER
DATA
DESCRIPTION
The close command acts as a release closing and safety function.
Radio channel 1: Disabled
