5
3. Installation
3.1 Battery
Handpiece has built-in lithium battery. Battery charges wirelessly through the base.
•
Plug in power adapter and connect it to the charging base
•
Seat handpiece on the charging base
• Blue light will be flashing while device is charging
•
Blue light will stay on when fully charged
3.2 Contra angle
•
The contra angle adopts precision gear transmission, and the transmission ratio
is 6:1.
• Clean and disinfect with disinfectant of neutral PH value before the first use.
•
Clean and disinfect after each patient use
•
Sterilize under 134°C, 2.0~2.3bar (0.20~0.23MPa).
• Contra angle in package only fits ApexPilot G2. It does not fit other handpieces.
Installation of contra angle
•
Align any locating pin of the contra
angle with the positioning slot on the
motor handpiece and push in the
contra angle horizontally.
•
The three locating pins on the
contra angle are inserted into the
three positioning slots on the motor
handpiece.
•
A “click” sound indicates that the
installation is in place.
•
The contra angle can be rotated 360°
freely.
Removal of contra angle
Pull out the contra angle horizontally when the motor handpiece is turned off.
Warning
After installation, give the contra angle a light tug to make sure that it is securely
attached before starting motor.
Stop the motor before plugging in or pulling out the contra angle.
Summary of Contents for ApexPilot G2
Page 1: ...Cordless Endo Motor Instruction for Use...
Page 31: ......
