Beyerdynamic MCW-D 50 Operating Instructions Manual Download Page 6

Steuerzentrale MCW-D 50

D

0

6

Sie haben sich für das drahtlose, digitale Konferenzsystem MCW-D 50 von beyerdynamic entschieden. Wir danken für Ihr
Vertrauen. Nehmen Sie sich bitte einige Minuten Zeit und lesen Sie diese Bedienungsanleitung vor Inbetriebnahme aufmerk-
sam durch. 
In dieser Bedienungsanleitung werden die Installation und Bedienung des Systems 

ohne

Steuerung und Konfiguration über

einen PC beschrieben.

Folgende Komponenten gehören zur Grundausstattung eines Systems für den Betrieb ohne PC:
• Steuerzentrale MCW-D 50
• Delegiertensprechstelle MCW-D 521
• Präsidentensprechstelle MCW-D 523

Die Steuerzentrale MCW-D 50 ist in zwei Versionen lieferbar:

MCW-D 50-3 

für Konferenzen, bei denen bis zu 3 Redner (z.B. 2 Delegierte und 1 Präsident) gleichzeitig sprechen können.

MCW-D 50-9

für Konferenzen, bei denen bis zu 9 Redner (z.B. 7 Delegierte und 2 Präsidenten) gleichzeitig sprechen können.

Weitere Informationen zur Steuerung und Konfiguration des MCW-D 50 Systems über einen PC finden Sie in der
Bedienungsanleitung „MCW-D 50 Conference Software“.

3.

Steuerzentrale MCW-D 50

Die Steuerzentrale MCW-D 50 ist das Herzstück des Systems. Mit ihr werden die Delegierten- und Präsidentensprechstellen
gesteuert. Mit der Standardausführung der Steuerzentrale MCW-D 50 können maximal 3 Redner (z.B. 2 Delegierte und 1
Präsident) gleichzeitig sprechen.

3.1

Bedien- und Kontrollelemente

Vorderseite

Power-LED. LED leuchtet grün: Gerät ist eingeschaltet und betriebsbereit

Stand-By-Taster. Bei längerem Drücken (> 3 Sekunden) werden alle eingeschalteten Sprechstellen im Empfangsbereich 
abgeschaltet. Bei kurzem Drücken werden alle zugeteilten Mikrofone abgeschaltet.

Reset, setzt die Anlage in den Einschaltzustand zurück. (Versenkter Taster, z.B. mit Büroklammer bedienen.)

LEDs für Status der Empfangskanäle. LED leuchtet grün: Kanal frei. LED leuchtet rot: Kanal belegt.

Lautstärkeregler für Sprechstellenlautsprecher

1

1

2

3

4

5

2

3

4

5

Summary of Contents for MCW-D 50











































































Reviews: