MCW-D 50 Control Unit
E
32
3.2.2
How to connect the Antennae
• Connect the receiving antennae to the antenna inputs A and B .
• Connect the transmitting antenna to the antenna output .
• For stand-alone-operation we recommend using the CA 2411 angled rod antenna.
3.2.3
Audio Connection
• Connect the XLR or RCA master output to the input of a mixing console/amplifier.
• Always route cables running to the unit where they will not be pinched or cut by heavy or sharp objects.
3.2.4
Power Supply
• Verify that the voltage rating of the unit matches that of the AC mains outlet you are to use. If you connect the unit to the
wrong voltage, you may seriously damage it.
• Always route cables running to the unit where they will not be pinched or cut by heavy or sharp objects.
• Connect the MCW-D 50 control unit to the mains . The internal power supply unit of the control unit can adjust auto-
matically between 100 V and 240 V at 50 - 60 Hz.
Important:
• There must be an
unobstructed path between
the
microphone units
and the
antennae
, i.e.
between
the
MCW-D 50 control unit
and the
microphone units there must not be any obstacles
. The range is around
30 - 50 m
. For optimum range the surface of the table is important, wood or plastic tables are ideal, but metal tables
can cause interferences and reduce the range.
15
11
19
20
20
19
19
11
15
18
18
18
Summary of Contents for MCW-D 50
Page 24: ......
Page 25: ...MCW D 50 OPERATING INSTRUCTIONS Discussion System...
Page 48: ......
Page 49: ...MCW D 50 NOTICE D UTILISATION Syst me de conf rence digital sans fil...
