MCW-D 50 Control Unit
E
33
3.2.5
How to switch the Control Unit on/off
• Switch on the MCW-D 50 with the On/Off-switch on the rear.
• During the first 30 seconds the MCW-D 50 control unit is started, the Power LED and the Channel LEDs are flashing red
and an operation is not yet possible. If the MCW-D 50 control unit is connected to a network via the LAN connection , the
MCW-D 50 control unit will be ready for operation after approx. 20 seconds.
• The Power LED on the front will illuminate green, when the control unit is ready for operation.
•
CAUTION:
Always turn off the power when making input or output connections.
Rear
Front
3.2.6
Channel Indication
• Depending on the configuration of the MCW-D 50 control unit 3 or more channel-LEDs will illuminate green
(standard: 3 channels).
3.2.7
Rack Mounting
• When mounting the
MCW-D 50 control unit into a 19"-rack housing leave 1 HU for a ventilation panel above and
under the control unit
.
3.2.8
Volume Control
• The volume of the microphone units is controlled with the virtual volume control of the MCW-D 50 Conference Software.
Important:
• If the MCW-D 50 control unit is equipped with more than one module, but there are not more than 3 LEDs illuminated,
please check if individual modules have been deactivated with the MCW-D 50 Conference Software.
16
1
1
4
7
4
16
1
4
Summary of Contents for MCW-D 50
Page 24: ......
Page 25: ...MCW D 50 OPERATING INSTRUCTIONS Discussion System...
Page 48: ......
Page 49: ...MCW D 50 NOTICE D UTILISATION Syst me de conf rence digital sans fil...
