Setting up
E
38
4.2 Powering / Operating Time
• The microphone units have an integrated rechargeable battery allowing
an operating time of 20 hours.
• As soon as the capacity is too low for a satisfactory operation, the operating
control LED will flash. The remaining time of operation is around 60
minutes.
• The supplied MCW-D 50 Conference Software indicates the decreasing
battery voltage on a PC or external media control system connected to the
MCW-D 50 control unit.
Rear view microphone unit
4.3 Powering with external CA 2457 Power Supply Unit
• The MCW-D microphone units can be also powered with the CA 2457
external power supply unit which can be connected to the DC socket
on the rear of the microphone unit.
• During the time the power supply unit is connected, the microphone
unit is also being charged. Please refer also to chapter
8. Battery
Charging with external Power Supply Unit
.
Rear view microphone unit
4.4.1
Normal Operating Mode
4.4 Operating Modes
• The different operating modes such as Normal, Push-To-Talk or Voice Activation are adjusted with the MCW-D 50 Conference
Software. The standard operating mode is Normal. Please refer also to the appropriate MCW-D 50 Conference Software
manual.
• Press the microphone button to switch on the gooseneck
microphone.
• Red ring of the gooseneck microphone is illuminated
and the LED is illuminated green: The microphone is ready
for talking.
• Using the MCW-D 50-3 control unit 3 participants (e.g. 2 delegates
and 1 chairman) can speak simultaneously. Using the
MCW-D 50-9 up to 9 participants (e.g. 8 delegates and 1 chairman)
can speak simultaneously.
Important:
• If the number of open microphones is reached, a
microphone can only be switched on manually
when another microphone unit has been switched
off.
Delegate
Chairman
3
3
2
2
8
7
7
8
8
7
Summary of Contents for MCW-D 50
Page 24: ......
Page 25: ...MCW D 50 OPERATING INSTRUCTIONS Discussion System...
Page 48: ......
Page 49: ...MCW D 50 NOTICE D UTILISATION Syst me de conf rence digital sans fil...
