28
Isssue 2
Doc. No. 002 Issue 2 April 1998
7 Press
Esc
to go back to the stand-by position or scroll to
another function and continue programming.
Change calling time
Use this function to change the calling time, i.e. for how long
the entrance phone should attempt to contact the telephone
before the call is disconnected. When the system is delivered,
the calling time is set to 30 seconds. If no change is required
to the calling time, skip this section.
To change the calling time, proceed as follows:
1 Go to the
Options menu
and scroll to the
Change calling time
function (follow the initial instructions in the
Change call
duration time
section on page 27). The following text is displayed:
/ TO SCROLL
CHANGE CALLING TIME
2 Press
. The following text is displayed:
ENTER TIME (1–999 sec)
(30)
3 Enter the desired calling time, e.g. 25 for 25 seconds.
4 Press
. The following text is displayed again:
/ TO SCROLL
CHANGE CALLING TIME
5 Press
Esc
to go back to the stand-by position or scroll to
another function and continue programming.
4. PROGRAMMING
..
.