19
Doc. No. 002 Issue 2 April 1998
In this chapter are the instructions on how to program
telephone numbers, time zones etc. Normally, the installer
performs the basic programming,as described here. How to
change, delete and print information are described in the user
manual. All information is programmed on the central unit.
Proceed as follows:
1 Open the cover of the central unit, using the key supplied.
2 Use the keyboard when programming the information. The
display shows prompts telling what to do next.
Keys
09 Used to enter digits.
Esc
Used to leave menues and to interrupt what you are
currently doing.
Used to delete characters backwards and to scroll backwards
through stored entries, e.g. codes.
Used to scroll forward through stored entries.
Used to confirm entered information.
Used when programming the apartment phones.
Programming
Display
Small keyboard
4. PROGRAMMING
Esc
1
2
3
4
5
6
7
8
9
*
0
#