BC610 Installation and User manual
19
Card parameters
When BC610 is delivered, the card reader reads positions 9 to
16 on the card’s magnetic strip, or the last 8 positions if they
are fewer than 16. If you want to use your own cards and they
should be read differently, enter from which position on the
magnetic strip the reader should start reading and how many
digits should be read (max. 8).
Note!
Previously logged on cards will not work if you change
the card parameters.
1
Set the card reader to programming mode.
2
Press A97.
"!"
3
Enter from which digit in the card number (01-40) the
digits should be read.
To reset this function to the default setting, press A at
this point.
4
Enter the number of digits to be read (1-8).
5
Press B to leave programming mode.
