BC610 Installation and User manual
17
Erase the memory and reset the default settings
When the card reader’s memory is erased, the default settings
are restored (see below).
1
Set the card reader to programming mode.
2
Open the card reader with the key supplied. The lock is
located on the underside of the card reader.
3
Press the SW1 button (see the wiring diagram on page
8).
4
Press 112186.
5
Press 112186 one more time.
All previously logged on cards have now been erased. The
card reader reverts to the following settings:
•
Password: 112233
•
Common code: None
•
Opening time: 7 seconds
•
Toggle security level: 0
•
Card parameters: Position 9-16, the last 8 positions if
fewer than 16 positions.
