3
UNPACKING INSTRUCTIONS:
Note:
All Bevies cabinets are tested, inspected and expertly packed
to
insure arrival in
a
ready-to-use
condition. If any damage or loss is discovered when unpacking, ask the carrier's agent (in writing) to inspect
the product. This must be done within
15
days
of
delivery. You can then file
a
formal claim with the carrier.
This product has been shipped securely packed on a wooden pallet, covered with a protective bag and
corrugated shipping container and sealed with durable banding material. Carefully read the following
unpacking instructions and properly dispose of all packaging materials.
To open:
1. Carefully cut and remove banding material.
2. Carefully lift the corrugated container off the product.
3. Open door(s) and remove the cartons containing the wire racks, pan supports, and all packing
materials (tape, cardboard, etc.)
4. Carefully lift cabinet off pallet.
5. Check model number on the serial number label, located on the left side of the unit.
6. Release all wheel brakes
SETTING-UP
1. Remove all protective film from interior and, exterior surfaces on cabinet, and doors.
2. Place the cabinet in the location where it will be operated. When in position secure the brakes on
the front two wheels. These brakes should always be locked when the cabinet is in use.
3. Install 1" NPT drain coupling, if needed (fig. 1) and connect drain line (by others) This will be
used to drain the cast aluminum water pan.
4. Make certain that your unit is properly connected to the correct power source as specified on
the serial number label, located on the side of the unit.
5. Insert a half size sheet
pan 18” x 13" (not provided with proofer) in the slides under the base of
the cabinet. This will serve as a condensation drip pan when cabinet is in use.
6. Open the cartons containing the pan supports and install all supports in cabinet. Starting from
the bottom. Skip (2) slots between each support, to achieve a 4 1/2" spacing between racks.
7. Open the cartons containing the wire racks, and install racks in cabinet.
Fig. 1
Summary of Contents for Cinnabon PICA70-32-AED
Page 9: ...8 Amp rating 120v Models 13 amps...
Page 10: ...9 Amp rating 208 230v Models 7 5 6 8 amps...
Page 12: ...11 Notes...
