20
Standby Mode, which is indicated by the green indicator
light flashing.
2. Unplug the power adapter from the electrical outlet.
3. Clean the device, in particular the light area as instructed
in the “Care and Maintenance” section.
4. Store the device in its original box and keep it away from
water.
5. After treatment, do not use any antiperspirants/
deodorants as these may cause skin irritation. Do not use
peeling and bleaching creams or products for at least 24
hours. Avoid direct sun exposure for at least two weeks.
If recently-treated skin is exposed to sunlight in this time
period, make sure to apply SPF 30 or higher sunscreen.
Do not wax or pluck hairs from treated areas.
What to expect when using the
IPL PureSkin Pro
During treatment it is normal to experience:
• A flash of light on each press of the Pulse Button. The
light will not harm the eyes when the device is applied
with full contact to the skin.
• A popping noise with each pulse.
• A sensation of heat radiating from the treated area after
each pulse.
• Some mild red or pink coloration during and just after
treatment.
After Treatment:
• Apply a soothing lotion such as aloe.
Remember that hair may take up to two weeks to fall out if
the hair follicle is still active.
10. Care and Maintenance
• Shut off and unplug the device before cleaning.
• Clean the light emitter area and skin contact sensor after
every session by using a slightly damp, lint-free cloth.
• Keep the device dry. Never place, store or use this device
near bathtubs, showers, basins or other containers of
water as this may cause electric shock.
• If you do not plan on using the device for a long period
of time, clean it and store it away.
11. Troubleshooting
• If the device does not turn on:
a. Ensure the power cord is connected properly into
the device and the electrical outlet.
