18
and press the Pulse Button again. Ensure that the light area
and skin contact sensor come into full contact with the
skin. This mode guarantees precise treatment, such as for
knees and ankles.
NOTE:
Allow the device to cool for a few minutes if it feels
too hot for you. Continue your treatment after a short cooling
period.
Facial Treatment Method:
WARNING:
If you have undergone any other aesthetic procedures
• Men must not use this device on the face.
• Do not use energy level 3 on the face. Do not use the
device on the face above the cheekbones or on the eyes,
eyebrows or eyelashes, as this could result in severe
damage to the eyes. Do not use the device on mucous
membranes in the nose or throat area.
The skin on your face is very sensitive and requires special
care. Observe all warning and safety notes in these instruc-
tions for use to prevent adverse consequences. We recom-
mend first performing a treatment on your body and get to
know the device before performing facial treatment. The de-
vice can be used to treat all areas of the face below the cheek-
bones, such as the upper lip, cheeks, jaw, chin, and neck.
1. You must carry out a skin sensitivity test 48 hours befo-
re treatment. Perform the skin sensitivity test on an area
without hair, such as below the ear or on the side of the
neck, to determine the suitable energy level. Do not treat
the tested facial area for at least one week after perfor-
ming the skin sensitivity test.
2. Mark the treated area with a white eyeliner pencil. Use
the marking as an orientation line for treatment areas.
This way you can prevent overlapping treatment areas or
treating other areas of the face by mistake.
3. Use a mirror to position the device correctly on the treat
ment area.
Treating the upper lip
Position the light emitter as shown in the gray
areas in the figure at right. Trigger a pulse
in every marked zone. Avoid applying the
treatment to the nostrils and lips, as these
areas are more sensitive.
You can “fold in” your lips or press them together to make
the treatment area flatter or apply a thick layer of white
eyeliner to the lips and around the edge of the lips. The
white line ensures that the energy of the flash is reflected
and does not reach your lips, should you accidentally apply
a pulse to your lip.
