background image

22

Is the device painful to use?

When used correctly, most users of the device report only 

a slight warm feeling when the light pulse is issued. Users 

with thicker and darker hair may experience slightly more 

discomfort, but this subsides once the hair removal session 

is complete. The device has three power settings, which 

you can select depending on the sensitivity of your skin.

How often should I use the device?

The first four sessions should be performed two weeks 

apart. The fifth to seventh sessions inclusive can be 

performed four weeks apart. Any further sessions should 

be performed if the hair has grown back until the desired 

results have been achieved. 

Is the device also effective on white, gray, or blond hair?

The device is most effective on dark hair types or on hair 

with a high melanin content. Melanin is the pigment that 

gives hair and skin its color and absorbs light energy. Black 

and dark brown hair shows the best response. Brown and 

light brown hair also responds to treatment, but it usually 

requires more hair removal sessions. A limited effect can be 

seen on red hair. White, gray or blond hair does not usually 

respond to treatment, although several users have noticed 

results after multiple hair removal sessions.

Can I use the device on brown or black skin?

The device is not effective on naturally dark skin. The 

device is a light-based device that removes undesired hair 

by means of the selective treatment of the hair pigment. A 

different amount of pigment is present in the surrounding 

skin tissue. The amount of pigment in the skin of any given 

person – which can be seen by the color of the skin – 

determines the degree of risk that the person is exposed to 

when using the device. Treating dark skin with a light-based 

hair removal procedure can have adverse consequences, 

such as burns, blisters or discoloration of the skin (hyper- 

or hypopigmentation). The device contains an integrated 

skin color sensor, which measures the skin tone prior to 

each flash. The skin color sensor prevents the device from 

emitting pulses if it detects dark skin tones.

When can I expect to see noticeable results?

As with all other hair removal devices that are based on light 

or lasers, results cannot be seen immediately and you could 

even think that nothing has happened at all. After a hair 

rmoval session, the hair sometimes appears to grow back, 

but normally, the majority of these hairs will simply fall out 

after two weeks. Additionally, hair grows in three different 

stages and the device only affects the hairs in the active 

growth phase. This is one of the main reasons why multiple 

sessions are necessary to achieve the desired result.

Summary of Contents for IPL PureSkin Pro 5500





























Reviews: