background image

7

-  On damaged or cracked skin or in areas at risk of 

malignancy.

-  On an area of your body where you may like to have 

hair in the future.

 CAUTION

To reduce the risk of personal injury or product/

property damage: 

•  Use the IPL PureSkin Pro only according to the 

instructions for use.

•  Hair removal by lasers or intense pulse light sources 

can cause increased hair growth in some individuals. 

Based upon currently available data, the highest risk 

group for this response is females of Mediterranean, 

Middle Eastern, and South Asian heritage treated on 

the face and neck.

•  This appliance is not intended for use by persons with 

reduced physical, sensory or mental capabilities.

•  Do not use the device if:

-  The device is not working properly, appears damaged 

or broken (UV and IR emitted from this device)

- The cord or plug are damaged

- You see or smell smoke

- The outer shell is damaged or loose

- Lamp or Treatment Window is damaged/missing

- Optical skin tone sensor is cracked, or broken

- Becomes damp or wet.

•  Avoid more than 15 minutes of sun exposure for at least 

2 weeks post treatment. If during these two weeks your 

treated skin area is exposed to sunlight, make sure to 

apply SPF 30 or higher sunscreens.

•  Do not treat the same area of skin more than once per 

treatment as it may cause skin irritation.

•  This device is intended for one individual’s use only. To 

help prevent transmitting diseases between users, do 

not let others use the IPL PureSkin Pro.

•  Do not attempt to open or repair your device. Attempting 

to open the device may damage it and invalidates your 

warranty.

•  The device should never be left unattended when it is 

plugged into a socket.

•  Do not operate the device if the device itself, a cable 

or a plug is damaged and keep the mains cable away 

from hot surfaces.

•  Always unplug the device from the mains immediately 

after use.

•  Do not use the device with attachments or accessories 

that are not recommended by Beurer.

•  During use, do not expose the device to temperatures 

below 10 °C or above 35 °C.

•  Do not use the device if you see or smell smoke during 

use.

Summary of Contents for IPL PureSkin Pro 5500





























Reviews: