30
Beurer GL44 lean
Transferring measurements
1
The monitor must be switched o
ff
. Insert the larger,
flat USB connector of the connection cable into a
USB port on your PC. Insert the mini USB connector
into the integrated interface socket on the GL44 lean
monitoring system.
2
“
” is shown on the display of the monitor. The
monitor is now ready for the data transfer.
3
Follow the information on data transfer and evaluation provided in the software and the in-
structions for use of the software.
7 S
TORING
,
MAINTAINING
AND
DISINFECTING
THE
DEVICE
Storing
Keep the Beurer GL44 lean monitoring system in the case supplied after each measurement and do
not expose it to direct sunlight.
Note
• Do not store the device, test strips and control solution in your vehicle, in the bathroom or in a cool-
ing appliance!
• Retain these instructions for use.
• Remove the batteries if you do not intend to use the device for a prolonged period of time.
7.1 Cleaning
Device
Only clean the device when it is switched o
ff
.
Clean the surface of the device using a soft, slightly damp cloth (water or a mild cleaning solution).
Dry the device using a lint-free cloth.
Make sure that moisture does not enter the test strip insertion slot. Do not spray cleaning products
directly on the device. Do not submerge the device in water or any other fluids and make sure that
no fluids can get into the device.
Lancing device
Clean the surface of the lancing device using a soft, slightly damp cloth (water, a mild cleaning solu-
tion or rubbing alcohol). The lancing device must not be immersed in water or other liquids or be
cleaned in the dishwasher. Dry the lancing device using a lint-free cloth.
7.2 Disinfection
Device
Please comply with the generally applicable guidelines on disinfection when using the device on dif-
ferent persons. Do not submerge the device in disinfection solutions or any other fluids and make
sure that no fluids can enter the device.
