5
2. Package Contents
• Glass Body Analysis scale BG42
• 1 x 3 V lithium battery CR2032
• These operating instructions
• Quick reference guide
3. Device description
Overview
1. Display
2. “ON” key
3. “Down” key
4. “UP” key
5. “SET” key
6. Conductors
Measuring units
lb
pound
kg
kilogram: the base unit of mass in the international
System of Units.
st
stone: only for countries where British English is
spoken.
General Notes:
• The capacity of the scale is 330 lb (150 kg, 24 st).
• For weight measurement and determined bone mass, the results are shown in 0.2 lb increments (100 g, 0.01 st).
• The measuring results of the body fat, body water and muscle percentage are shown in 0.1 % increments.
• The caloric requirements is specified in steps of 1 Kcal.
• Ages 10 to 100 and height settings from 39” to 87” (100 to 220 cm) can be preset.
• On delivery, the scale is set to “inch” and “lb”. To the rear of the scale, there is a button where you can select
“pound”, “stone” and “kilogram” (lb, st, kg).
For product information, questions or customer service call toll free 1-800-536-0366 or email [email protected]
4. The measuring principle
This scale operates according to the B.I.A. principle (bioelectric impedance analysis). This enables the measu-
rement of physical relationships within seconds by means of an unnoticeable and harmless signal from the con-
ductors in the scale. The body fat percentage and other physical relationships in the body can be determined
by measuring the electrical resistance (impedance) and calculating constants and individual parameters such
as age, height, gender, weight and degree of physical activity.
Muscle tissue and water have good electrical conductivity, and therefore lower resistance. Fatty tissue, on the
other hand, has low conductivity as fat cells hold a lower water content than muscles.
1
2
3
4
5
6
6
